Home arrow Products arrow Hashima arrow Flat Type Fusing Press Machine arrow HP-124AP
HP-124AP Print E-mail

Image

 

AUTOMATICALLY MOTOR DRIVEN, OPTIONAL FRONT TRAY, VACUUM, EMERGENCY SWITCH, ELECTRIC THERMOSTAT, PRESSURE TIMER, FLAT TYPE FUSING MACHINE

 

SPECIFICATION

 

 

Model HP-124AP
Power Supply Three phase or Single phase
Rated Output HEATER: 3.650W , MOTOR: 40W
Temperature (Max) 200 oC
Pressure (Max) 21og/cm 2
Dimension of Plate 1.200x400mm
Dimension 950(D)×1,226(W)×1,340(H)mm
Net Weight (approx.) 210kg
Feature
  • Motor driven fully-automatic flat type press.
  • Compact and requires no extra equipment such as an air compressor, and can be installed very easily.
  • Uses a special heater and the aluminium heater plates give excellent thermal efficiency and uniform temperature distribution.
  • Electronic thermostat and SSR (Solid State Relay) minimizes temperature difference range, and uses electrical contactpointless component to improve the durability of the machine.
  • Pressure and temperature can be controlled easily by the dial on the control panel.
  • Uses a 200w driving motor to assure quiet running.
  • Anti-static type Teflon sheet is used for the upper plate, making it easy to clean.
  • Although the suction system is automatic, pedal-operation is also possible (when using a tray, pedal-operation can not be used). Electrical contact-pointless components are used to improve the durability of the machine.
  • The powerful 200w blow motor provides extravacuum sucking power, and the sirocco fan is equipped to reduce noise.
  • Sizes and spacings of the suction holes in the center part and around both ends on the lower plate have seen properly adjusted, to provide uniform sucking power over the entire surface.