Sort By:

The machine model 1006 allows a perfect ironing of any type of collar thanks to a patented system of moulds and countermoulds, easy to install and not expensive to product.
The machine operates with a double pressing system (first pressing-blade return/second pressing); a PLC system programs the pressing time. The pressing plates are covered with a special rubber to avoid making shiny collars ; a thermostatic system regulates temperature both on lower and upper pressing plates, ensuring an even heating of the collar and the highest quality results.

The cuff hem pressing machine mod. 1007 presses the hem of shirt cuffs and fixes the adhesive to the cloth, in order to make the initial sewing on the cuff easier. It is possible to iron every cuff shape.
The machine operates electro-pneumatically, and is equipped with a PLC control system.
The machine is equipped with an automatic stacker that picks up the cuff after processing and aligns the cloth perfectly, preventing any possible defects on the cut.

Specifically designed for marking collar pieces where point perforation is not possible.
The machine is equipped with a pieces stacker and is easy to adjust for size marking.

The machine mod. 3009 allows the lower adhesive part to be fixed to any type of shirt collar using 7 totally adjustable pointers.
The collar is positioned by reference points that are also adjustable.
It is equipped with an automatic stacker which lifts the collar after processing and a thermostatic system to regulate the temperature of the pointers. The operation is electro-pneumatically controlled by a PLC.

The automatic MCD unit, complete with sewing machine, is made for sewing the fronts of shirts.
It distinguishes itself for simplicity and quality of the final product. During stitching, a suction system aligns the fabric for perfect stitching. The fabric then passes under a heated puller to eliminate wrinkles in the front strip.
The machine is equipped with automatic thread cutting and stacking; sewing and conveying speed are adjusted electronically.
The stitch width can vary from a minimum of 0.8 to a maximum of 30 mm, the sewn stitches are counted electronically using a PLC.

This MSP H.B. machine guarantees perfect pressing of all types of cuffs using an easy to install mould and counter-mould system.
The cuff is pressed (mould and counter-mould) first on one side and then on the other; this guarantees accurate pressing on both sides of the cuff.
The machine is supplied with a PLC software to regulate the pressing times.
The lower plate temperature can be regulated by a thermostatic system.

The automatic MCD unit, complete with sewing machine, is made for sewing the fronts of shirts.
It distinguishes itself for ease of use and the quality of the final product. During sewing phase, a suction system aligns the fabric for a perfect stitching. Then, the fabric passes under a heated puller to eliminate wrinkles in the front strip.
The machine is equipped with automatic thread cutting and stacking; sewing and conveying speed are adjusted electronically.
The stitch length can vary from a minimum of 0.8 to a maximum of 30 mm, the sewn stitches are counted electronically using a PLC system.

Collar turning and points shearing device for shirts, electro-pneumatic operating. It is possible to adjust the shearing angle to any desired position, without replacing dies or punches.
The working sequence is controlled by a PLC system.

The automatic UAM O1 unit allows pockets to be sewn on automatically without the need to iron them first.
Minimal template cost. Easy template replacement.
The program can be changed directly on the machine.
The laser lines can be used to ensure centring of striped and chequered materials.

The automatic UAM 02 unit can perform the following operations by simply replacing the template:
removable stays;
label application;
pleat sewing.

The UAM 03 is a machine for sewing collars and cuffs, completed with a MAICA lock stitch sewing machine, with sewn cuff trimming.
It is a totally electronic controlled unit managed by a software that allows the sewing of any type of stitch with automatic size changing.?To change the model simply replace the low cost and easily made fabric holding plates.?Collar and cuff trimming is performed separately from the sewing phase: a different cut can be made, compared to the stitching.